This paper presents a preliminary experimental and numerical investigation of the mechanical response of a flat arch using a 3D-printed small-scale physical model analysed through distinct element modelling. Based on the historical rules introduced by Coulomb, the arch is designed with joint inclinations chosen to guarantee a controlled minimum friction capacity, and fabricated via fused filament fabrication. Due to the characteristically high horizontal thrust, flat arches typically experience small abutment displacements and settle into a minimum thrust configuration. Two experimental tests with different interface properties are performed to investigate this mechanical response under increasing horizontal displacement. The in-house VEDEM+ plugin is adopted to link CAD modelling with 3DEC (Itasca), enabling precise geometric modelling and systematic post-processing of the structural response. A parametric study is subsequently carried out to interpret the experimental observations. The results demonstrate that interface friction significantly affects both the displacement capacity and the governing collapse mechanism. In particular, as expected, in a high-friction scenario, sliding is avoided, and a pure hinging mechanism governs collapse from the outset. Conversely, when friction capacity is low, sliding initiates at the interfaces and persists until the internal thrust finds a configuration in which the force inclination at each joint falls within the friction cone; once this condition is met, a hinging mechanism develops and ultimately governs collapse.
DEM Investigation of Sliding Mechanisms in a 3D-Printed Flat Arch
Iannuzzo, Antonino
;Cusano, Lino;Picariello, Francesco;Maddaloni, Giuseppe
2026-01-01
Abstract
This paper presents a preliminary experimental and numerical investigation of the mechanical response of a flat arch using a 3D-printed small-scale physical model analysed through distinct element modelling. Based on the historical rules introduced by Coulomb, the arch is designed with joint inclinations chosen to guarantee a controlled minimum friction capacity, and fabricated via fused filament fabrication. Due to the characteristically high horizontal thrust, flat arches typically experience small abutment displacements and settle into a minimum thrust configuration. Two experimental tests with different interface properties are performed to investigate this mechanical response under increasing horizontal displacement. The in-house VEDEM+ plugin is adopted to link CAD modelling with 3DEC (Itasca), enabling precise geometric modelling and systematic post-processing of the structural response. A parametric study is subsequently carried out to interpret the experimental observations. The results demonstrate that interface friction significantly affects both the displacement capacity and the governing collapse mechanism. In particular, as expected, in a high-friction scenario, sliding is avoided, and a pure hinging mechanism governs collapse from the outset. Conversely, when friction capacity is low, sliding initiates at the interfaces and persists until the internal thrust finds a configuration in which the force inclination at each joint falls within the friction cone; once this condition is met, a hinging mechanism develops and ultimately governs collapse.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.


